You are here: Home > Product line > Suspension
 
 

 
     
   
     
   
     
   
     
   
 

 
 

 
 

 
 

ProX is listing an extensive range of products in the suspension section. No matter if you blew a forkseal, worn out your swingarm or linkage bearings, or just need to replace your rear shock bearings, ProX is offering a solution.

Forkseals and Dustcaps are available for almost any dirtbike, sold individually or in sets. Next to the oilseals ProX also offer the frontfork bushing kits, containing all guide & slide bushings, o-rings and snap rings. On the rearshock ProX supplies the rear shock seal head kits, a complete assembly ready to install into the rear shock body.

Essential for properly working suspension it’s important your swingarm bearings, swingarm linkage bearings and rearshock bearings are in good shape. Heavy load and dirt can cause severe wear on these parts and should be checked regularly. ProX is offering complete replacement kits for the swingarm bearings, swingarm linkage bearings and rear shock bearing. These kits contain all needed bearings, bushings and seals and offer a simple, complete and cost efficient replacement for the OEM parts.

   
 

 
 

ProX frontfork bushing kits come as complete replacement kits including guide & slide bushings, copper washers and fork seal snap rings.
The kit has been tested dynamically on durability and performance and is available for many Dirt bike applications.

Special features

  • Teflon coated bushings for increased durability.
  • Proven results from dynamic testing on durability.
  • Complete sets for easy install.
  • Huge range of MX models available.
  •    
     

     
     

    ProX Racing Parts swing arm kits are available for Off Road and ATV applications. The complete rebuild kits come with all necessary parts you need to completely rebuild your swing arm.

  • Bushings are case hardened and plated to prevent wear and corrosion.
  • Pins are through hardened and precision ground.
  • Needle bearings are made from 52100 bearing steel, ARC61-65 heat treated and have a ST13 steel shell.
  • The washers are made from Teflon for increased service life.
  •   top â–²
     

     
     

    ProX Racing Parts linkage rebuild kits are available for Off Road applications. The complete rebuild kits come with all necessary parts you need to completely rebuild your linkage arms.

  • The shafts supplied are made from 52100 bearing steel and precision ground.
  • Needle bearings are made from 52100 bearing steel, ARC61-65 heat treated and have a ST13 steel shell.
  • Bushings are case hardened and plated to prevent wear and corrosion.
  • All linkage kits include the lower shock bearing kits.
  •   top â–²
     

     
     

    Rear shock bearings need to be maintained frequently. ProX offers a wide range of Rear shock bearing for Dirbike applications.

  • Comes with needle bearing, cup seal and bushing.
  •   top â–²
     

     
     

    Being used in MX and Offroad the OEM wheel spacers often see water and dirt. During riding the water and dirt are grinding the spacers and will cause significant wear. Wheel spacer should therefore be checked and, if necessary, replaced during every wheel bearing service.

    The ProX Wheel Spacer Kit is a complete and direct replacement for the OEM parts. The ProX alloy spacers feature a hardened steel shell pressed over the alloy providing a superior wear surface and resulting in longer wheel spacer and bearing life.

    Black anodising on the alloy spacers give a great corrosion resistance and appearance. These alloy spacers come with the wear properties of hardened steel but at the light weight of alloy.

    The ProX Wheel Spacer Kit is the perfect replacement that extensively outlasts the OEM spacers!

    ProX Wheel Spacer Kits Features

  • Complete and direct replacement that extensively outlast the OEM parts.
  • Alloy spacers feature a hardened steel shell providing superior wear surface.
  • Showing wear properties of hardened steel while keeping the light weight of alloy.
  •   top â–²
     

     
     

    The ProX rear shock seal head kits are designed to be an upgraded replacement for the OEM parts. The rear shock seal kits are supplied as a complete assembly which is ready for installation into the rear shock body.

    The rear shock seal heads are manufactured from a 6061-T6 Alloy body and contain an internal guide bushing, oil seal, dust seal, o-ring and snap ring. The redisigned seals offer superior sealing and is a major upgrade over the OEM seals.

    A complete and competitively priced range of rear shock seal head kits for MX and Offroad bikes are available from stock.

    ProX Rear Shock Seal Head Kit Features

  • Complete assembly, ready to install into rear shock body.
  • Redesigned oilseals for superior sealing.
  • Competitively priced.
  • Full range of MX and Offroad models available from stock.
  •   top â–²
     

     
     

    ProX offer a wide range of frontfork oilseals and dustseals for the MX and Dirtbike segment. Most of the seals are manufactured by the leading OEM factories in Japan such as NOK. The seals are all manufactered from high quality base materials and are made to OEM specs and tolerances to guarantee quality and superior durability. Forkseals and dustseals are available separately, in sets of 2 oilseals or 2 dustseals and also in sets of 2 oilseals plus 2 dustseals for a complete rebuild.
    A full range of seals for the MX and Dirtbike segment is available from ready stock!

    ProX Frontfork Oilseal and Dustseal features

  • Manufactured by the leading OEM factories in Japan such as NOK!
  • High quality base materials made to OEM specifications and tolerances for quaranteed quality and superior durability!
  • Available separately or in sets to be a simple and cost efficient OEM replacement!
  • Full range of oilseals and dustseals for MX and Dirtbike available from ready stock!
  •   top â–²
     

     
     

    ProX offer a wide range of frontfork oilseals and dustseals for the MX and Dirtbike segment. Most of the seals are manufactured by the leading OEM factories in Japan such as NOK. The seals are all manufactered from high quality base materials and are made to OEM specs and tolerances to guarantee quality and superior durability. Forkseals and dustseals are available separately, in sets of 2 oilseals or 2 dustseals and also in sets of 2 oilseals plus 2 dustseals for a complete rebuild.
    A full range of seals for the MX and Dirtbike segment is available from ready stock!

    ProX Frontfork Oilseal and Dustseal features

  • Manufactured by the leading OEM factories in Japan such as NOK!
  • High quality base materials made to OEM specifications and tolerances for quaranteed quality and superior durability!
  • Available separately or in sets to be a simple and cost efficient OEM replacement!
  • Full range of oilseals and dustseals for MX and Dirtbike available from ready stock!
  •   top â–²
     

     
     

    Another new line is taken up in the ProX range, the ProX chain rollers. This is a complete line of OEM replacement and universal chain roller for our Dirtbike program. Special Polyurethane material used in the universal chain rollers offers superior hardness to guarantee long life while the sealed precision bearings have 2 additonal outer seals to protect the bearing against water and dirt. These chain roller are one of the longest lasting chain roller available on the market ! The hi-performance self lubricating nylon OEM replacement chain rollers will fit directly to the frame boss.

    ProX chain roller features

  • Made from Hi-performance self lubricating nylon for guaranteed long life.
  • Heavy duty chain roller have additional seals to increase bearing life.
  • Universal 34, 38 and 43 mm. chain rollers are designed to be an OEM replacement.
  • Full line of Dirtbike models available.
  •   top â–²